Instruction For 320A Eye Lifting Hook

Instruction for 320A Eye Lifting Hook

The 320A eye hook should pay attention to the environmental conditions when used in conjunction with the rigging, and 

the rigging must not be twisted and knotted. During the lifting process, the hooks are strictly prohibited from being 

impacted and impacted.

At present, the 320A eye hooks are generally forged single hooks, the cast hooks are not allowed on the crane, and the eye 

hooks are widely made of low carbon steel and carbon alloy steel.

Hooks are used to connect cranes and heavy objects, and their maintenance must be valued. For this reason, when the 
lifting height limiter or the hook locking device of the hook is broken or damaged, it is absolutely not allowed to be used 
again; as for the undocumented job, the leadership responsibility shall be investigated. In order to ensure safety, the hooks
 shall be inspected and shall be scrapped when one of the following conditions is found.
1 crack occurred on the 320A eye hook;
2 The wear amount of the dangerous section is not more than 5% of the original height according to the hook manufactured by GBl0051.2; the hook manufactured according to the industry standard shall be greater than 10% of the original size;
3 opening degree increased by 15% than the original;
4 Torsional deformation exceeds 10 degrees;
5 Plastic deformation of the dangerous section or the hook neck;
6 When the wear of the 6-plate hook bushing reaches 50% of the original size, the core sleeve should be scrapped;
7 When the wear of the 7-plate hook mandrel reaches 5% of the original size, the mandrel should be scrapped.

It is also important to note that the above defects of the hook must not be welded.


PINTEJIN Rigging lifting sling now has become leading enterprise in China. And we are creating the largest-scale and metal forging workshop.PINTEJIN has the complete production line from raw material to finished products. Each processing has independent workshop, making lifting sling, ratchet strap, car towing belt from 0.5T to 3000T. We are capable of finishing big order quickly.

Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *