Potassium methylsiliconate H-102k

CAS:31795-24-1

DESCRIPTION

H-102K Excellent water resistant, reduce water absorption into the substrate, thus reducing spalling due to freeze-thaw and efflorescence, thereby increasing the life of the materials.

Colorless and non-yellowing protection, preserve the natural appearance of the substrate.

Penetrating and breathable , low VOC.

TYPICAL PROPERTIES

Appearance

Clear solution

Solid Content

42% or 52%

Density(g/cm3):

1.4

Diluter:

Water

Active content:

Approx 28%

K20 equivelent

20%±0.1

USES AND APPLICATION

H-102K It is clear water-dilutable potassium/sodium methyl siliconate solution. As a surface treatment in applications that utilize its ability to impart a water repellent surface and reduce water absorption. Designed to impart water repellency to a wide variety of substances,such as sandstone, limestone, marble, granite and bricks, ceramics,gypsum and gypsum-based plasterboard, light fillers etc.

Dosage:

Cement mortar, concrete:  ( H-102K: water = 1: 4-10 diluted, mix to cement mortar or concrete)

Masonry:  ( H-102K: water = 1: 15-20 diluted, soak masonry 15-20 minutes)

Building surface:  (H-102K: water = 1: 4-10 diluted ,brush directly to the surface of the building)

The siliconate reacts with carbon dioxide (CO2) in the air to form an insoluble water-resistant treatment within 24 hours.

It is also particularly effective in preventing humidity from rising within walls(rising damp). For this application the product is injected into the walls.

SAFETY

Before handling, read the Material Safety Data Sheet and container label for safe use, physical and health hazard information.

STORAGE AND SHELF LIFE

After sealing packaging products stored in a cool, dry place , H-102K has a shelf life of 36 months from date of manufacture.

PACKAGING

H-102K  is available in 200L drum and 1000L IBC or others.

Link to this article:Potassium methylsiliconate H-102k

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Silicone And Casting,Thanks

Bookmark the permalink.

Comments are closed.